top of page

Market Research Group

Public·11 members

Combo Stimulator If-5000 User Manual \/\/TOP\\\\

In this article, we will explain how to use the Combo Stimulator If-5000 for pain relief and muscle stimulation. We will also provide some safety tips and troubleshooting advice. Please read the user manual carefully before using the device and consult your doctor if you have any questions or concerns.

Combo Stimulator If-5000 User Manual


What You Need

To use the Combo Stimulator If-5000, you will need the following items:

  • The device and its power adapter

  • Four pairs of electrodes and lead wires

  • A clean towel or cloth

  • Some water or gel to moisten the electrodes

  • A comfortable place to sit or lie down

How to Set Up the Device

Follow these steps to set up the device:

  • Plug the power adapter into an electrical outlet and connect it to the device.

  • Turn on the device by pressing the ON/OFF button. You will hear a beep and see the LCD screen light up.

  • Select the mode you want to use by pressing the MODE button. You can choose from four modes: MS (muscle stimulation), IF (interferential stimulation), MS+IF (muscle stimulation plus interferential stimulation), or IF+MS (interferential stimulation plus muscle stimulation).

  • Select the channel you want to use by pressing the CH button. You can use up to four channels at a time.

  • Connect the lead wires to the electrodes and then to the device. Make sure the color-coded plugs match the color-coded sockets.

  • Moisten the electrodes with water or gel and place them on your skin according to your doctors instructions. Make sure there is good contact between the electrodes and your skin.

How to Adjust the Settings

Follow these steps to adjust the settings:

  • Press the SET button to enter the setting mode. You will see a flashing parameter on the LCD screen.

  • Use the UP and DOWN buttons to change the value of the parameter. You can adjust the following parameters: pulse width, pulse rate, ramp time, burst frequency, sweep frequency, and beat frequency.

  • Press the SET button again to move to the next parameter. Repeat step 2 until you have adjusted all the parameters you want.

  • Press the START/STOP button to start the stimulation. You will hear a beep and see a timer on the LCD screen.

  • Use the UP and DOWN buttons to increase or decrease the intensity of each channel. You should feel a comfortable tingling sensation on your skin.

  • Press the START/STOP button again to stop the stimulation. You will hear a beep and see OFF on the LCD screen.

Safety Tips and Troubleshooting

Please follow these safety tips and troubleshooting advice when using the Combo Stimulator If-5000:

  • Do not use the device if you have a pacemaker, implanted defibrillator, or other implanted metallic or electronic device.

  • Do not use the device if you are pregnant, have epilepsy, cancer, or any other medical condition that may be affected by electrical stimulation.